How to Boost Vessel Bottoms

The end of your vessel is often the portion that needs the very most washing. This is the place that actually sits in the water with lots of dust, trash and other materials that can pollute and even cause harm to the outer lining place of your vessel. To avoid these problems, you can blast underneath of your vessel regularly with a power machine. A power machine blasts the vessel surface place with a high-powered stream of water to remove dust and trash before it can become a problem.

Instructions

1
Attach the power machine to a drinking water line. Add the cleaner you are using to stress wash the vessel base to the designated tank of the power machine. A vehicle washing product will work well.

2
Use the 25 level apply tip on the power machine. This will give you enough power to fresh the vessel base, but should not harm the outer lining place or strip the paint.

3
Spray down the boat bottom using the spray tip on the pressure washer. Spray each area for a total of five to 10 minutes, but keep moving around the boat to keep all areas wet. Spray with a 90 degree angle to protect the boat surface.

4
Attach a rotating scrub brush attachment to the pressure washer if you can still see dirt and debris. Move the scrub brush along the boat bottom in a circular motion to clear away stubborn dirt and debris.

5
Rinse the boat bottom with plain water to clean away the soapy residue.